Cincinnati XT Profiler

Printable Version

Cincinnati XT Profiler RT v2-FIVES

Product description

There isn't a commercial aircraft flying that hasn't been touched by a Cincinnati Profiler! These multi-spindle, multi-axis contour milling machines apply decades of 5-axis experience from an extensive, worldwide, installed base. The Cincinnati XT Profiler is offered in 3- and 5-spindle configurations with 1.02 m (40") and 2.03 m (80") center distances. For manufacturers that process multiple materials, the 7000 rpm spindle provides the power and speed to cut aluminium, steel, and titanium. For hard metal shops, the 3500 rpm high-torque spindle is ideal. 

Product advantages

  • Full 5-axis contouring or 3-axis roughing
  • A/B rotary axis head with ±30 degrees of travel
  • 3, 4, or 5 spindle with 52 kW (70 hp) each:
    • 7000 rpm, 1345 Nm (986 ft-lbs), ANSI 50, HSK-100A, KM4X100
    • 3500 rpm, 2523 Nm (1860 hp), ANSI 60, HSK-125A
  • Spindle distances up to 2.03 m (80”)
  • Designed and optimized for steel and titanium
  • Vertical configuration for lowest capital investment
  • Siemens 840D Solution Line control is standard

Technical specifications

  XT (3-axis) XT (5-axis)
X-axis (minimum) 4367 mm
X-axis (incremental) 3658 mm
Y-axis – 3 spindle, 80" CD 3683 mm
Y-axis – 5 spindle, 40" CD 3683 mm
Z-axis 711 mm
A-axis N/A  ±30 degrees
B-axis N/A ±30 degrees
  XT (3-axis) XT (5-axis)
X-axis 15240 mm/min
Y-axis 10160 mm/min
Z-axis 2540 mm/min
A-axis N/A  700 dpm
B-axis N/A  700 dpm
  XT (3-axis) XT (5-axis)
Speed (maximum) 7000 rpm
Power (S1) 52 kW
Torque (S1) 1345 Nm
Taper ANSI 50, HSK-100A, KM4X-100
  XT (3-axis) XT (5-axis)
24000 rpm (motorized) 3500 rpm
Power (S1) 52 kW
Torque (S1) 2523 Nm
Taper ANSI 60, HSK-125A

Other products

  • Fives metal cutting composites Cincinnati HyperMach V Web-FIVES Cincinnati HyperMach Vertical Series

⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.

In order to address your request, we need to collect the information listed in the form below

Information on data processing

As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.

The data collected are exclusively for the use of FIVES departments.

Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.

These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.

In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).

To find out more about our personal data protection policy click here


*

Despatch of these emails is managed by a FIVES partner located in the United States, an active member of Privacy Shield. The partner guarantees processing compliant with European requirements for personal data protection. Unsubscribe with a single click on a link in the message received.


* required fields

Your message has been sent and will be treated as soon as possible. Thank you for contacting Fives.

Sorry, we encountered a problem, your message was not sent