Cincinnati XP Profiler

Printable Version

XP Profiler View-A 03-FIVES

Product description

As the newest profiler design, this best-in-class machine platform offers high efficiency machining for both thin and thick plate processing of large, aluminum structural components such as ribs, bulkheads, plate, frames, stringers, and spars.

Product advantages

  • Cuts machining time up to 80% for aerospace aluminum parts
  • Full 5-axis contouring 
  • A/B rotary heads with +/- 40 degrees of travel 
  • Three spindles: 20,000 rpm, 85 kW (114 hp), HSK-100A
  • Spindle distance up to 2.54 m (100 in)
  • Vertical configuration for lowest capital investment 
  • Siemens 840D Solution Line control is standard 

Technical specifications

  XP (eXtreme Performance)
X-axis (minimum) 9144 mm
X-axis (incremental) 6096 mm
Y-axis – 3 spindle, 40" CD 2542 mm
Y-axis – 3 spindle, 80" CD 4165 mm
Y-axis – 3 spindle, 100" CD 3150 mm
Z-axis 750 mm
A-axis ±40 degrees
B-axis ±40 degrees
  XP (eXtreme Performance)
X-axis 25400 mm/min
Y-axis 25400 mm/min
Z-axis 25400 mm/min
A-axis 2400 dpm
B-axis 2400 dpm
  XP (eXtreme Performance)
Speed (maximum) 20000 rpm
Power (S1) 85 kW
Torque (S1) 84 Nm
Taper HSK-100A

⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.

In order to address your request, we need to collect the information listed in the form below

Information on data processing

As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.

The data collected are exclusively for the use of FIVES departments.

Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.

These rights can be exercised by email to or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.

In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).

To find out more about our personal data protection policy click here


Despatch of these emails is managed by a FIVES partner located in the United States, an active member of Privacy Shield. The partner guarantees processing compliant with European requirements for personal data protection. Unsubscribe with a single click on a link in the message received.

* required fields

Your message has been sent and will be treated as soon as possible. Thank you for contacting Fives.

Sorry, we encountered a problem, your message was not sent