Cincinnati HP Profiler

Product description
There isn't a commercial aircraft flying that hasn't been touched by a Cincinnati Profiler! These multi-spindle, multi-axis contour milling machines apply decades of 5-axis experience from an extensive, worldwide, installed base. The Cincinnati HP Profiler is offered in 3-, 4-, and 5-spindle configurations with center distances up to 2.54 m (100"). The 10000 rpm spindle is extremely rugged to provide many years of service.
Product advantages
- Full 5-axis contouring
- A/B rotary axis head with ± 30 degrees of travel
- 3, 4, or 5 spindle:
- 10000 rpm, 75 kW (100 hp), ANSI 50
- 20000 rpm, 85 Nm (114 hp), HSK-100A
- Spindle distances up to 2.54 m (100”)
- Designed and optimized for a aluminium
- Vertical configuration for lowest capital investment
- Siemens 840D Solution Line control is standard
Technical specifications
HP (High Performance) | |
X-axis (minimum) | 4367 mm |
X-axis (incremental) | 3658 mm |
Y-axis – 3 spindle, 40" CD | 2542 mm |
Y-axis – 3 spindle, 80" CD | 4165 mm |
Y-axis – 3 spindle, 100" CD | 3150 mm |
Y-axis – 4 spindle, 75" CD | 2515 mm |
Z-axis | 711 mm |
A-axis | ±30 degrees |
B-axis | ±30 degrees |
HP (High Performance) | |
X-axis | 15240 mm/min |
Y-axis | 15240 mm/min |
Z-axis | 5080 mm/min |
A-axis | 450 dpm |
B-axis | 450 dpm |
HP (High Performance) | |
Speed (maximum) | 10000 rpm |
Power (S1) | 75 kW |
Torque (S1) | 150 Nm |
Taper | ANSI 50 |
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here